• 中文 (中国)
  • English
  • 中文 (中国)
  • English
  • 主页
  • 我们的产品
  • 关于我们
  • 联系我们
  • kay@jennypennytech.com
  • +85261588111
联系表

您有疑问吗?

请务必留下您的电话号码。 工作时间内我们将在15分钟内与您联系

    Menu
    • +85261588111
    • kay@jennypennytech.com
    Home Products 隔离电源分配器

    隔离电源分配器

    可根据需求定制
    输入信号:4-20mA、1-5V、0-10V
    输出信号:4-20mA、1-5V、0-10V
    通道:1进、1出
    电源:直流24V
    安装:35mm DIN导轨
    准确度:0.1%
    特点:体积小
    响应时间:≤10ms

    • Description
    • 运输和交付
    Description
    如果您在设备上没有看到所有列,请向右滑动表格
    Input signal0-1A,0-5A,0-10A, 204mA,-1A-+1 A, others
    Distribution voltage24V
    Input resistance<5000
    Output load resistanceRL < 500Ohm (when the output is a current signal) RL>10KOhm (when the output is a voltage signal)
    Output signal10-0 V; -10 V~ +10 V; others
    Power supplyDC 24 V, DC 12 V
    Current consumption<50 mA (One in and one out) <70 mA (One in two out)
    Response time<10 mS (0-90%) (TYP)
    Temperature drift0.005% F.S./°C
    Dielectric strength500 V AC/ 1 min (input, output, power)
    Insulation resistance>100 MOhm (input, output, power)
    Working temperature-20~+55°C
    Electromagnetic compatibilitymeets the GB/T 18268(IEC61326-1)
    Applicable field devicesTwo-wire system, three-wire transmitter; current source.
    运输和交付

    关于订单

    • 请将您的采购订单细节发给页面上的联系人。 如有其他随单资料请一起发给我们。 收到您的订单需求后,我们将安排专员第一时间处理您的需求
    • 最低起订量:100/件。

    关于配送

    • 买方承担配送费用,我司按照买方指定要求发货。
    • 收到货物后检查包装是否完好无损,避免在运输中造成损害
    Close
    • 主页
    • 我们的产品
    • 关于我们
    • 联系我们
    Home
    Shop